Real silicone sex dolls for men 100cm

Dear buyer:

       This is a high quality doll.   Not a cheap blow up.

Sex dolls can provide you with all the same joys that your spouse or partner may offer you in your bedroom. There are times when your spouse or partner is not always available, when you want action in the bedroom. Therefore, the best solution is to have it with a Silicone Companion.

       We have CE certified  and Environmental protection material inspection book ensuring you get the best quality dolls.     Beware other sellers selling counterfeit dolls or inferior dolls for. Yes there are cheaper dolls out there, they come from other manufactures who use cheaper grade, even recycled materals.    You work hard for your money, don’t buy an inferior counterfeit doll.

       I will work with you from start to finish to ensure you get your dream doll.

​

The outer layer of the product is made of TPE (thermoplastic elastomer), which is made of epoxy resin and all kinds of metal joints. The material of the product conforms to the relevant safety standard stipulated by the state and has no poison to the human body and the environment. It is recommended to clean the private parts before use, can be wiped with 75% of medical alcohol wipe disinfection.Use must be applied to human body lubricants, so that the internal device has sufficient lubrication.In addition, in order to confirm the safety and health, it is recommended to wear Condoms. If the doll is not enough lubrication, sexual interest decreased and easily lead to cracks in the private parts of access.Please clean after use, rinse the private parts with tap water inside, use 75% of the medical alcohol wipe the water, then placed in warm water soak 2 ~ 3 minutes, naturally dry or dry with a dry cloth, place no light at the sealing treatment.

2. Range Of Activities

• 1. head can rise before and after the level of action in the range of 40 degrees, about swing, amplitude can not exceed 40 degrees.
• 2. arm upper limb to the front can be raised to the chest, about 60 degrees in front, back can be slightly bent 20 degrees to both sides of the horizontal direction can be raised to the flush with the chest Department, about 60 degrees on both sides of the direction, The arm can be rotated 90 degrees in one direction.
• 3. waist can be bent back and forth, upright, sitting can be.
• 4. leg left thigh about 180 degrees apart, the maximum single-leg split about 100 degrees, the knee can bend about 60 degrees.

3. Maintenance Instructions

• 1. the body of the product is equipped with various joints in the internal can be put in a variety of posture range.But the product factory for the natural straight posture, it can not be a long time to let the doll placed or a difficult bending posture,The arm and thigh can not be a long time to maintain a large solitary degree of open or rotating state, after use, please put down on both sides of the body and maintain the same state with the factory when unpacking, So as to avoid the activities of glial deformation or damage.
• 2. such as the skin surface area of dust and dirt, use the general detergent can be cleaned, such as detergent, shower gel, but should avoid using the fingernail to scratch the skin surface.Wash the skin and other surface moisture, Smooth the surface of the skin smooth as ever, feel fine. Sellers recommend. as the case to do regular cleaning and maintenance.
• 3. Wait for the surface of the skin dry, the baby gently marked with prickly heat powder or talcum powder, strong protection of baby skin.

4. Environmental Requirements

In order to protect the doll can be long-term use, the placement of the environment have certain requirements, a good storage environment can be good to prevent the doll’s skin cracking and internal parts of the aging, maintenance doll performance and doll life.

• 1. should avoid direct sunlight, long-term sunshine baby will fade and the phenomenon of easy to dry skin.
• 2. should avoid excessive dust environment, dolls have a sticky surface and electrostatic large, very easy to stick sticky dust, avoid dust conducive to skin care.
• 3. should avoid the humid environment, the doll inside the alloy for the joints, the surface of a certain degree of soft absorbent, long-term in the wet ring static, slow infiltration of water on its gum and skeleton are negative, doll cleaning should avoid long Time to place the water.
• 4. do not put a long time in the leather or stained leather seats, darker clothes to avoid wearing a long time to avoid the pigment into the skin inside, our company has matching to the cream for sale, but the internal pigment Still difficult to remove, need to pay attention.
• 5. should avoid the room temperature is too high or too low, the baby can not be placed in a long time too high or too low environment, the most suitable ambient temperature should be 5-35 degrees Celsius (41-95 degrees Fahrenheit) between.Dolls can be placed in air-conditioned rooms or heating room should pay attention to the temperature within the appropriate range, to avoid long-term abnormal temperature colloid changes.
• 6. dolls placed to avoid extrusion, extrusion will cause deformation for a long time, do not put heavy objects on the doll or local compression tightening and so on.
• 7. dolls are thermoplastic materials, please stay away from fire, for example, in the heating blanket or pit bed, please note the temperature.

5.Clothes To Wear

Physical doll Although the limbs can be active, but still have a certain range of activities, to wear doll clothing, the need to note the following points.

• 1. the anti-stick can use the prickly heat powder or the talcum powder, the sex doll skin has the stickiness, after wiping the prickly heat powder or the talcum powder is easy to wear and prevents the dust, also may spray the small quantity eliminates the static electricity agent.
• 2. to prevent excessive bending of the body, do not wear clothes when the arm swing or too much distortion, to avoid skin rupture or limb deformation.
• 3. pay attention to scratches, do not wear a sharp edge of the clothing or accessories to prevent scratches the skin.If the clothes or accessories with sharp buttons or accessories, try to avoid wearing or careful handling.
• 4. for the baby ear hole or hole, wearing earrings and other jewelry, you can use a thin wire or needle in the doll first hole, but should not exceed the diameter of 0.5mm, avoid cutting with a knife or other equipment, and wear jewelry Do not pull hard after, to avoid large deformation or perforation at the rupture.
• 5. to prevent staining, try to avoid wear dyed leather or other oil-based stained material clothing made of dark stained leather clothing for a long time to wear may cause its color into the doll internal, resulting in skin color, although our company to go Color paste, but the internal pigment is still difficult to remove glial, do not use dark clothing or accessories for a long time.

6. Small Damage Repair Methods

• 1. such as the surface of the skin surface of trifoliate orange damage, can use the distribution of glue bonding. First clean the damaged surface, the wound at the rubber back to the original position, and then evenly coated with a layer of glue, waiting for about half an hour to dry solid, if other technical problems can be directly contact us, as the case may provide Processing technology.
• 2. the baby skin once the damage, please stop using it immediately, as soon as possible to effectively repair the note is: TPE colloid can not use the general bonding punishment, repair, please use our special TPE repair agent, Repair, contact customer service to buy larger or more serious damage, do not directly repair, please take pictures and customer service to confirm the patch program.

7. Precautions

• 1. dolls imported safety TPE material manufacturing, because the characteristics of the material itself, may be improper use or improper preservation and other circumstances to produce damage and cracks. When moving the doll must hold the trunk, not directly pull the limbs or head.
• 2. baby dolls can be free to bend and maintain a variety of posture, but not for a long time to keep bending or twisted state, not applicable to restore the packaging still need to store the state, frequent activities or long bending will lead to deformation of the body or the surface of plastic Quality rupture.
• 3. dolls in the casting molding, the colloid surface will be a slight markings or prints, the product will be the factory marks and sub-horizontal line for processing, but not 100% removal of traces. At the same time, the doll joints because of the activities of the design, there may be minor markings, is a normal phenomenon, does not affect the normal use.
• 4. doll body positioning holes, mold seams, local fine markings are part of the process, is inevitable, not a quality problem.
• 5. due to personal hygiene, the best doll for personal use, while using the front and rear, clean, as far as possible in the use of condoms to use.